Surveyor Robotics Journal
email:
support@surveyor.com
web:
Surveyor Corporation
rss:
Subscribe
Archives
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
Februray 2006
January 2006
Sat, 24 May 2008
Default Matchport configuration for SRV-1 Blackfin is now 2500kbps
The special version of Matchport firmware (matchport-6500GE.rom) that Lantronix built for us has proven to be very robust, and in many ways, superior in performance to the default 6.6.0.0 firmware. As such, shipments of the SRV-1 Blackfin robot and SRV-1 Blackfin camera w/WIFI will henceforth be preconfigured with this 6500GE firmware on the Matchport and 2500kbps firmware on the Blackfin.
Note that if you check the Matchport settings through the web interface, it will show the CPU Performance as medium and the baud rate at 9600. You can ignore these settings. In case you inadvertently reset the Matchport, you can recover the settings via telnet to port 9999, using the instructions shown here - http://www.surveyor.com/cgi-bin/yabb2/YaBB.pl?num=1209480141
Posted Sat, 24 May 2008 14:35 | HTML Link | see additional stories ...