Surveyor Robotics Journal
email:
support@surveyor.com
web:
Surveyor Corporation
rss:
Subscribe
Archives
August 2010
July 2010
June 2010
May 2010
April 2010
March 2010
February 2010
January 2010
December 2009
November 2009
October 2009
September 2009
August 2009
July 2009
June 2009
May 2009
April 2009
March 2009
February 2009
January 2009
December 2008
November 2008
October 2008
September 2008
August 2008
September 2008
August 2008
July 2008
June 2008
May 2008
April 2008
March 2008
February 2008
January 2008
December 2007
November 2007
October 2007
September 2007
August 2007
July 2007
June 2007
May 2007
April 2007
March 2007
February 2007
January 2007
December 2006
November 2006
October 2006
September 2006
August 2006
July 2006
June 2006
May 2006
April 2006
March 2006
Februray 2006
January 2006
Sat, 04 Apr 2009
New signal breakout board for SRV-1
Adding new sensors and actuators to the SRV-1 Blackfin camera and robot just got a lot easier. Our first batch of signal breakout boards has arrived.
We are selling the bare breakout board for $6, board with 32-pin header for $16, and board with 32-pin header + battery header + 3.3V 1A regulator for $32. You can order the boards with headers from the Surveyor online store, and bare boards direct from Surveyor.
The middle board with just the header and no voltage regulator is ideal for the SRV-1 Blackfin Robot, as it stacks between the Blackfin processor card and radio/motor card (after a little surgery on the robot faceplate), as shown below:
More details on the Surveyor Robotics Forum.
Posted Sat, 04 Apr 2009 15:09 | HTML Link | see additional stories ...
Soccer robot using SRV-1 Blackfin Camera
Our partner Netspectrum has developed a very interesting set of soccer robot controls using the SRV-1 Blackfin Camera and a biped robot. More information is found on the Surveyor Robotics Forum
Posted Sat, 04 Apr 2009 11:35 | HTML Link | see additional stories ...