|Surveyor Robotics Journal|
Tue, 15 Jun 2010
First SRV1Console images from SRV-1 Blackfin Linux
We just captured first images from simple srv1 server application running on the Blackfin uclinux port. There's some corrupted frames due to character post-processing on the stdio console that we haven't been able to completely clear, but 50% of the frames are getting through intact. Here's a sample. Apologies for picture quality - lots of reflections from the afternoon sun:
Once the console issue is resolved, the next tasks are adding support for OV7725 (this was taken via OV9655), bumping the baud rate to work at full speed with the Matchport, and then porting various robot controls to our SRV_protocol, SRV_httpd and picoC interfaces. Lots to do, but this was an encouraging first step.