Technical Specifications & Features:
Download product data sheet (pdf format)
Transit offers maximum control speed of 240+ degrees/second; on-the-fly speed and position changes; pan range of just under 180 degrees, (field of view is camera dependent). Tilt range varies between 120 - to nearly 180 degree range, depending on optics and camera size. TheTransit RCM has a maximum weight accommodation of 1.5 lbs (.65 kg)
. The TransitRCM works with our award-winning Webcam32 Software, and you can also get sample Java and HTML/CGI-script remote control scripts from our User's Guide
- Remotely controllable via RS-232/422/485 terminal, computer interface, or various web interfaces
- Up to 8 Transits can be controlled by single serial channel
- Closed-loop servo control for fast and accurate camera positioning
- Controls for motorized zoom, focus and iris
- Small form factor
- Simple ASCII command set for program control
- The TransitRCM has a Maximum Rated Payload of 1.5 lbs (.65kg).
- Maximum Speed: over 240 degrees/second
- Acceleration/Deceleration: on-the-fly position changes
- Pan Range: Nearly 180 degrees (field-of-view depends upon optics)
- Tilt Range: Nearly 180 degrees (may be limited by camera size) size)
- CGI example code for web developers posted on Product Support section of this website
Software command set(abridged):
- Set serial port to 9600 baud, 8 bit, no parity, 1 stop bit
- Position Pan Motor: 'A' followed by ASCII '0' to '127' followed by
- Position Tilt Motor: 'B' followed by ASCII '0' to '127' followed by
- ..... example A1
- Set acceleration / deceleration: 'D' followed by ASCII 1-127. (1 is fastest). Speeds 1, 2, and 3 are recommended for normal usage, while anything higher than 3 can be used for quiet motion, or for heavier cameras.
Physical / Electrical
- Weight: 1.5 lbs (0.7kg)
(Shipping weight 4 lbs.)
- Dimensions: 5.75" wide x 6.75" high x 2.06" deep
- Camera mounting: Hole for 1/4-20 standard screw
- Pan-tilt unit mounting: Bottom 1/4-20 mounting hole
- Power: 5VDC input @ 3.0A - included
- Outputs: 1 x RJ11 RS232C (for Surveyor Compass MVP), 3 x 0-5VDC @ 50ma each for zoom, focus and iris motor controls
- (note: zoom, focus and iris motor controls may require optional wiring harness, interface circuitry and separate power)
Specifications subject to change without notice.
|
|
Can you recommend a camera with the TransitRCM?
There isn't a camera on the marketplace that we've come across that does not work with the TransitRCM. In general, you should look at specifications for light sensitivity and horizontal resolution to match to your application, but as long as the camera can be mounted with a 1/4"-20 bolt, it should be compatible.
With which operating systems is TransitRCM compatible?
TransitRCM has been successfully tested on Windows 95/98/NT and Linux operating systems. Given the simple nature of the serial interface and command set, TransitRCM should be compatible with any operating system.
What software comes with TransitRCM?
TransitRCM comes with award-winning, Webcam32 software. Created in 1996, Webcam32 is the most mature, robust and continually evolving webcam software on the market. To learn more about Webcam32, visit the "Webcam32" page on this site.
How far from my computer can I place TransitRCM?
We've tested distances as far as 100ft using shielded twisted pair for the serial connection and good quality shielded video cable for the camera feed.
What type of setup do you have for your OfficeCam webcam at Surveyor's live demo cams?
We have 2 cameras with TransitRCM pan/tilt mounts connected to the same computer. The cameras are $200 generic CCTV models with 6mm and 8mm fixed focus lenses. The computer is a generic Celeron 333 running Linux and Apache. For video capture, we're also using low-cost components - the specific model board is a PixelView 878 (based on Brooktree 848/878 chipset). The computer is attached to our main T-1 ISP connection.
Is TransitRCM weatherproof?
TransitRCM is not weatherproof as shipped, but we've used it very successfully outdoors with a weatherproof dome.
What enclosures do you recommend?
We took a budget approach to our outdoor enclosure, purchasing a 12" outdoor light dome and mounting from a local lighting supply shop for about $40. Commercial enclosures, however, are available from firms such as Videolarm (http://www.videolarm.com), which produces an outdoor dome with a heater/blower option. Figure on paying $300-$400 for one of their setups.
What temperature/humidity ranges are recommended?
TransitRCM should operate without difficulty in temperatures up to 90°F (32°C) with 0-90% humidity. In more extreme conditions, TransitRCM's limitations should match the limitations of the supported cameras.
Where can I see a live demo of Surveyor's TransitRCM?
To see a demo of Surveyor's TransitRCM with live images of Surveyor's development lab and horse pasture, click here.
More questions? Please email us at: support@surveyor.com |
